HOME   TILT-UP FORMING    PRECAST FORMING   COMPANY INFORMATION


MSDS   /   ENVIRONMENTAL   /   HAZMAT INFORMATION
MILCO -- THE PERFECT SOLUTION !    ORDER FROM YOUR DISTRIBUTOR TODAY MILCO -- THE PERFECT SOLUTION!   ORDER FROM YOUR DISTRIBUTOR TODAY


MILCO Adjust-a-Trak™  — The perfect solution!

♦     ♦     ♦



MILCO Tilt-up & Precast Spray Adhesive

HAZMAT / SAFETY INFORMATION

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. MAY CAUSE FLASH FIRE. MAY CAUSE EYE, SKIN, AND RESPIRATORY TRACT IRRITATION AND MAY AFFECT THE CENTRAL NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE, AND NAUSEA. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.

CONTAINS: methyl acetate (79-20-9), non-hazardous components (trade secret), nitrogen (7727-37-9), dimethyl ether (115-10-6)

PRECAUTIONS: Keep away from heat. sparks, open flame, pilot lights, and other sources of ignition. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control vapor, mist, or spray. Avoid eye and skin contact. Avoid breathing vapor, mist or spray. Keep out of the reach of children. Do not puncture or incinerate (burn) container. Store at temperatures below 120°F (49°C).

SUGGESTED FIRST AID: Eye Contact: Flush eyes with large amounts of water. If symptoms persist, get medical attention. Skin Contact: Wash affected area with soap and water. If symptoms develop, get medical attention. Inhalation: Remove person to fresh: air. If symptoms develop, get medical attention. Ingestion: Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Get medical attention.

VOLATILE ORGANIC COMPOUNDS (VOCs) = 22 grams/liter. VOC less water less exempt solvent = 79 grams/liter. Contains a non-photochemically reactive solvent. Consult local air quality regulations which may regulate product use.

For Additional Product Health and Safety Information, see: Material Safety Data Sheet (MSDS) at http://www.milco-tilt-up.com, or EMERGENCY PHONE: 1-800-364-3577 or 651-737-6501 (24 hours). MILCO / 3M I.D. No. 62-4960-8930-1 Made in USA.

RETURN TO TOP OF PAGE

♦     ♦     ♦

MILCO CONCRETE CONCEPTS, LLC

A Nevada Limited Liability Company

CUSTOMER SERVICE
BOB MILLER            GREG STADTER

P.O. Box 61408
Vancouver, Washington USA 98666

TELEPHONE (Toll free): 1-866-US-MILCO (1-866-876-4526)   FAX:  1-360-574-8617

E-MAIL:   admin@milco-tilt-up.com   WEB: http://www.milco-tilt-up.com

NOTE — FOR QUESTIONS REGARDING ON-SITE ADHESIVE APPLICATION WORK-IN-PROGRESS,
CALL BOB MILLER AT 1-360-910-0225.

©  This Website, this Webpage and all content(s) incorporated therein or related thereto, including, but not limited to, any and all text, information, photographs, images, designs, concepts, drawings, references, layout design, HTML code and the like, copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009 by MILCO Concrete Concepts, LLC, a Nevada LLC.   All rights reserved.   3M™ is a registered trademark of Minnesota Mining & Manufacturing Company, St. Paul, MN.   iLevel® and TrusJoist®, Weyerhaeuser Businesses, are registered trademarks of Weyerhaeuser Company, Federal Way, WA,   TimberStrand® is a registered trademark of TrusJoist®, a Weyerhaeuser Company, Boise, ID. Revised 6-10-2009.

RETURN TO TOP OF PAGE